Red/Warm LED Chart Light with USB Charging Port

  • Code: AL3WRCL
  • |
  • Stock: In Stock

Black dimmable LED chart light with built in red and warm LED and a USB socket to enable you to charge your phone or tablet with a suitable USB charge cable.

The head of the light has a built in touch switch, first press and three red LEDs illuminate, press again and this swaps to warm white LEDs which dim via keeping your finger on the switch.

Red/Warm White (3000K), Light Output: 200lm, LED Power: 1W(red)/2W(warm), USB charging – 5V, 2A (max)

This is our long neck, black dimmable LED chart light with USB socket to enable you to charge your phone or tablet with a suitable USB charge cable.  The chart light the light has both warm white and red LED built in to enable use at night without changing vision.

The head of the light has a built in touch switch, first press and three red LEDs illuminate, press again and this swaps to warm white LEDs which dim via keeping your finger on the switch.  The head of the light is used to adjust the light direction, enabling you to direct the beam onto a book/map/work surface with the ribbed neck holding the position and the light is designed to push flat against the mounting surface when not in use.

Input Voltage Range: Regulated from 10V to 30V DC
Red/Warm White (3000K)
Light Output: 200lm (WW)
Beam Angle – 120 degrees

LED Power: 1W/2W
USB charging – 5V, 2A (max)
Length: 280mm (neck and head), 250mm neck

Base Height x Diameter: 21mm x 29mm

£32.99

You may also like…

Description

This is our long neck, black dimmable LED chart light with USB socket to enable you to charge your phone or tablet with a suitable USB charge cable.  The chart light the light has both warm white and red LED built in to enable use at night without changing vision.

The head of the light has a built in touch switch, first press and three red LEDs illuminate, press again and this swaps to warm white LEDs which dim via keeping your finger on the switch.  The head of the light is used to adjust the light direction, enabling you to direct the beam onto a book/map/work surface with the ribbed neck holding the position and the light is designed to push flat against the mounting surface when not in use.

Input Voltage Range: Regulated from 10V to 30V DC
Red/Warm White (3000K)
Light Output: 200lm (WW)
Beam Angle – 120 degrees

LED Power: 1W/2W
USB charging – 5V, 2A (max)
Length: 280mm (neck and head), 250mm neck

Base Height x Diameter: 21mm x 29mm