Touch Dimmable LED Aluminium Downlight

  • Code: ATA3WRD
  • |
  • Stock: In Stock

Aluminium touch dimmable/switched downlight designed for recess mounting, made with a metal body and bezel. The light fitting has built in LEDs, providing a bright light for just 3W of power.

This fitting is turned on/off by touching the aluminium bezel and a long press will dim/brighten the light so they only require a simple unswitched supply – a seperate switch or dimmer will not operate the light. This is identical in size and appearance to our aluminium recess downlight, please look at this version here if an unswitched version is required.

Diameter – 69mm, depth just 15mm so very low profile
Cut-out for recess – 58mm-62mm
Regulated from 10-30V
Approximate light output – 230lm (warm white), 250lm (cool white)
3.0W power consumption
2 years guarantee

Also available with in a white, black, chrome or brushed nickel finish.

Please note, as these units operate via conductivity they will not operate correctly if mounted into metal or if the unit or mounting springs touch any metal trim (including metal covered insulation to the rear of panels)

Aluminium downlight, designed for mounting into a suitable hole. The light fitting has built in LEDs and is regulated from 10-30V so is suitable for 12V or 24V use.

The unit is comes with an aluminium bezel and requires a 58 -62mm cut-out and enable the light to be mounted with a low profile. We have a range of alternate colour options for the bezel – white, black, chrome or brushed nickel.

The light fittings can be used as replacement lights for older fittings or can be used to provide additional lighting under cabinets or where required.

£12.99

You may also like…

Description

Aluminium downlight, designed for mounting into a suitable hole. The light fitting has built in LEDs and is regulated from 10-30V so is suitable for 12V or 24V use.

The unit is comes with an aluminium bezel and requires a 58 -62mm cut-out and enable the light to be mounted with a low profile. We have a range of alternate colour options for the bezel – white, black, chrome or brushed nickel.

The light fittings can be used as replacement lights for older fittings or can be used to provide additional lighting under cabinets or where required.

Additional information

LED Colour

,