This listing is for a 1m Dot Free LED strip along with controller and an LED driver (power supply) which provides a plug and play complete lighting kit to use along with your existing Philips Hue (you must have the Philips Hue Bridge installed and operating app to use this product). The price includes the LED, controller (to communicate with your Philips Hue app) and power supply. The LED strip is available in cool white or warm white LED colour.
Our new COB Dot Free LED strip provides a uniform light across the full length using the latest COB LED. The LED can be directly controlled to set brightness or can be used with one of the many automations available within the app.
Once unboxed, all that is required is for the power supply to be plugged in to the household socket and the 12V plug to be plugged into the LED controller. Once power is applied if you open the app and select 'Add Lights' the app will search for the unit - whilst this happens just press the 'set' button on the controller and the Bridge should identify and connect to the controller. Once this happens the lights will flash then you can name the light strip (e.g. Lounge shelf light) and select the type as 'Light Bar' and you are ready to use. The LED strip has a 3M self adhesive backing to mount to an appropriate location if required and the LED controller also includes a self adhesive pad for mounting.
The Dot Free COB LED is approximately 1m long, 10mm wide and 3mm tall and by default comes with a 30cm 2-core cable attached which is connected to the controller at the other end. This cable can be made longer by selecting below. The power supply has a cable length of approximately 105cm.
We can make the LED strips to different specifications up to 5m long so if you require longer strips, multiple lengths running from a single controller or longer cable lengths - please contact via email with your request and we can get back with a quote.
Up to 1m of additional Dot Free LED can be added to this kit to run from the same controller and power supply, this will be sent in the same LED colour as chosen for the kit - just select the additional 1m length below and you can also adjust the cable length for this below.
Please note, do not add any additional LED to the controller as you may take this over the capacity of the LED driver, if you require additional strips to run from this controller please email and we can advise on an appropriate LED driver to accommodate this.