Hand Sensor Operated LED – Different Lengths Available

This our hand sensor operated LED light fitting which features our proximity switch located within the fitting, move your hand within 50mm of the sensor (the light blue glow indicates the location of the switch).  This is suitable for use in caravans, motorhomes and boats using the 12V circuit or via an LED driver (Available Here) if using in the house.

This light is ideal for use under kitchen cupboards or near bathroom mirrors and is easily turned on/off via a short hand movement above the blue LED.

Light is provided by our LED strip lighting which uses 9.6W/m – available with either cool white LEDs (825lm/m) or warm white LEDs (725lm/m). 

The fitting is only 6mm high and 15mm wide and available in 30cm, 50cm to 1.0m lengths direct through the website or can be cut to length if you contact us direct via telephone or email.

Each fitting includes two mounting clips (although a good self-adhesive tape or adhesive could be used to mount the channel) and a 30cm cable, additional cable lengths can be selected below. 

Please note, we are unable to remove the blue indicator LED for this product so when connected to the 12V supply the low level blue light will be on. The quiescent current is approximately 16mA.

Please note that when ordered in lengths above 50cm, delivery will be made via a courier and will take 3-4 working days from date of order. Please contact us if a speedier service is required.

Please note, we are unable to send any items longer than 50cm outside of the UK. If these are purchased to send outside of the UK we will have to refund the items.