8-LED-MR11
LED Colour
8-LED-MR11
LED Colour
||

8 LED MR11

  • Code: 8LEDMR11
  • |
  • Stock: In Stock

The 8-LED MR11 has been designed to replace a 10W MR11 halogen, uses just 1.2W but provides approximately 25% more light. It uses the same cap as the halogen MR11 so replacement is straight forward. The pins are spaced 4mm from centre to centre and the MR11 lamp is also described as a GU4 lamp. Our 8-LED MR11 has a glass cover over the top of the unit.

Regulated from 10-30V
Includes fuse and voltage spike protection
Diameter – 35mm
Approximate light output – 150lm CW / 130lm WW
1.2W power consumption
3 year guarantee

Please note this is a listing for a single unit of the 8-LED MR11 i.e.1 lamp

The MR11 halogen is commonly used in spot lights, reading lights and extractor hoods and is easily replaced with an LED alternative. The MR11 halogen is easily identified as a conical shaped lamp with a 35mm diameter and two short pins spaced 4mm apart. If the diameter of your lamp is larger, please take a look at our MR16 section. The 6-LED MR11 is the 10W halogen replacement and provide a convenient replacement as the cap used is exactly the same size as the halogen. All control circuitry for the LEDs is located within the cap so it is just a case of remove the halogen and replace with our LED alternative.

£4.29

You may also like…

Description

The MR11 halogen is commonly used in spot lights, reading lights and extractor hoods and is easily replaced with an LED alternative. The MR11 halogen is easily identified as a conical shaped lamp with a 35mm diameter and two short pins spaced 4mm apart. If the diameter of your lamp is larger, please take a look at our MR16 section. The 6-LED MR11 is the 10W halogen replacement and provide a convenient replacement as the cap used is exactly the same size as the halogen. All control circuitry for the LEDs is located within the cap so it is just a case of remove the halogen and replace with our LED alternative.

Additional information

LED Colour

,